PDF Catalogue
toll free: 1.800.676.6123 | HOURS: 6:30AM - 5PM PST

110 VAC - 24 VDC - 2-Sync Hall Effect Control Box with Presets

110 VAC - 24 VDC - 2-Sync Hall Effect Control Box with Presets

MODEL: FLTCON-2

$175.00
Specs
FLTCON-2 DATA SHEET

The FLTCON-2 synchronous hall effect control box is designed to function with two 24VDC hall effect linear actuators. Our PA-03, PA-04, and PA-18 linear actuators can be customized to have a hall effect feedback sensor as well as a 24VDC motor. Our PA-04-HS units are readily available in 24VDC, and comes standard with the hall effect sensor required for the FLTCON series control boxes.

Using the wired remote with presets, the user can extend, stop, and retract the linear actuators in sync, as well as program up to 4 preset positions. Connect the hall effect linear actuators to the FLTCON-2 using the provided 6-pin molex connector. Connect the wired remote, then plug the control box into 120VAC. The system is now ready to use. Please note that the control box will not protect against large current surges caused by hard stops/ damaged units. It can also work as a replacement control box for our FLT-02, FLT-03-2-2, FLT-06, FLT-07 and FLT-10 table lifts. 

The FLTCON series does not include a wired remote, please see our Hand Remote section to choose the most suitable remote for the application.

FLTCON-2 SPECIFICATIONS

  • Input Voltage
    110 VAC
  • Output Power
    24 VDC
  • Current
    8A
  • Control Type
    Wired Remote (Not Included)
  • Size (L x H x W)
    10.1" x 1.6" x 3.5"
  • Unit Weight
    1.3 lbs
  • Certifications
    CE, FCC
  • Warranty
    18 Months
Data Sheet

Product PDF

FLTCON-2 DATA SHEET
Dimensional Drawing

Dimensional Drawing

110 VAC - 24 VDC - 2-Sync Hall Effect Control Box with Presets
Warranty

Warranty

We guarantee that all products you receive will be brand new, and have been thoroughly tested for defect and performance before being shipped to you. At Progressive Automations Inc we put our products to the test, stressing their performance in heat, cold, liquid, and under heavy loads and high duty cycles. The specifications listed on our products aren't just approximations, they're backed up by hours and days of testing. We're so confident in our actuators quality, performance, and endurance, that we proudly offer the industry leading 18 month warranty.

All products produced and sold by progressiveautomations.com are covered by our comprehensive 18 month warranty against defect or flaw. If we sell you a product, and it stops working before 18 month pass, we will replace it free of charge. However, the product has to only have been used within its rated parameters and environment conditions.

Please wait...