12/24VDC Control Box - 2 Channel - 25/12.5A - Individual Control - Wireless Remote
12/24VDC Control Box - 2 Channel - 25/12.5A - Individual Control - Wireless Remote
Model: CBK-PA-CB30-2-I
Couldn't load pickup availability
The PA-CB30 control box paired with the RT-41 linear actuator remote controller offers dual-channel outputs for individual control of two actuators and the ability to pair up to 4 remotes. Using this included RF remote, users can access functions such as Up (Channel 1), Down (Channel 1), Up (Channel 2), Down (Channel 2), Programming Modes, and Stop functions from a range of 60ft (18.29m) in the open air. The control box has an automatic power saving mode (4mA at 12VDC) with instant wake-up, wireless remote mode selection, smooth motion mode, momentary and non-momentary control, and LED indicator.
Safety features include out-of-range input voltage, overload, short circuit, and reverse input voltage protection. The suitable wire harness options with Molex connectors are sold separately and are used to connect your linear actuator to the PA-CB30 control box. This control box accepts an input of 10 to 26VDC across the power wires and is rated per channel to handle an output of 12.5A at 12VDC or 6.25A at 24VDC. Please see the PA-CB30 Data Sheet for information about controls, wiring, and troubleshooting.
Important: This control box does not come with a wiring harness. Be sure to check your setup requirements, as the harness may need to be purchased separately.
The PA-CB30 control box paired with the RT-41 linear actuator remote controller offers dual-channel outputs for individual control of two actuators and the ability to pair up to 4 remotes. Using this included RF remote, users can access functions such as Up (Channel 1), Down (Channel 1), Up (Channel 2), Down (Channel 2), Programming Modes, and Stop functions from a range of 60ft (18.29m) in the open air. The control box has an automatic power saving mode (4mA at 12VDC) with instant wake-up, wireless remote mode selection, smooth motion mode, momentary and non-momentary control, and LED indicator.
Safety features include out-of-range input voltage, overload, short circuit, and reverse input voltage protection. The suitable wire harness options with Molex connectors are sold separately and are used to connect your linear actuator to the PA-CB30 control box. This control box accepts an input of 10 to 26VDC across the power wires and is rated per channel to handle an output of 12.5A at 12VDC or 6.25A at 24VDC. Please see the PA-CB30 Data Sheet for information about controls, wiring, and troubleshooting.
Important: This control box does not come with a wiring harness. Be sure to check your setup requirements, as the harness may need to be purchased separately.
| Number of Channels | 2 |
| Input Voltage | 12/24VDC (10VDC - 26VDC) |
| Output Voltage | 12/24VDC (10VDC - 26VDC) |
| Current | 12.5A @12VDC Per Channel 6.25A @24VDC Per Channel |
| Duty Cycle | 25% (Max 5 minutes continuous) |
| Operational Temperature | -10°C to 50°C (14°F to 122°F) |
| Housing Color | Black / Blue |
| Housing Material | ABS Plastic |
| Kit Includes | 1x Control Box, 1x Wireless 6 button Remote (with Battery) |
| Wireless Frequency | 433.92 MHz |
| Wireless Range | Minimum 60 Feet |
| Wireless Remote Functions | Actuator 1 Up / Down, Actuator 2 Up / Down, Programming Modes, Stop |
| Remote Battery Type | 12V 27A Alkaline (included) |
| Dimensions (LxWxH) | 5.83" x 4.28" x 1.25" |
| Unit Weight | 0.31 lbs |
| Features |
|
| Safety Features |
|
| Power Option | Within voltage and power requirements. Plug and play connector. |
| Wiring Kit Options | AC-52-48, AC-53-48, AC-40-06, AC-35-06, AC-34-48 |
Following a set of standards is crucial for businesses to ensure their products and services can meet a level of quality that promotes customer satisfaction. At Progressive Automations, we aim for nothing but the best for our customers and strive toward continual improvements. Because of this, we are excited to announce that Progressive Automations is now ISO 9001:2015 certified!
Quality You Can Trust – Learn MoreData Sheets
PA-CB30-2-12V24V Data Sheet
How To Automate Your Trap Door Application
A trapdoor is a sliding or hinged door, flush with the surface of a floor, roof, or ceiling, or i...
Introducing The PA-CB31 and PA-CB40 Actuator Control Boxes
We’re excited to announce the release of two new additions to our growing lineup of actuator cont...
Sponsorship: Dr. Decks Phantom BBQ Progress Report
Dr. Decks has been one of our most valued customers for a long time and we have worked together o...
Depending on your application, there are different specification requirements you should consider when determining the linear actuator you need. These requirements include force, stroke, speed and mounting dimensions. For detailed actuator information, you can refer to either the datasheet or the specification table located on the selected actuator's product page. You can also contact us to speak with one of our expert engineers.
Duty cycle is the fraction of the working period in which a linear actuator can remain active. You can calculate the duty cycle of a linear actuator by using the following equation: Duty cycle (%) = (Time the linear actuator is active) / (Time for one working period)
For example: With a 25% duty cycle, an actuator can run for 5 minutes continuously before needing to rest for 15 minutes before operating.
Stroke is the travel distance of the extending rod. To find the stroke length you require, measure your application from the fully retracted position to the fully extended position. The difference will equal the stroke length you require.
We always recommend purchasing an actuator with a higher force rating than what the application requires. If unsure of your force requirements, this article may help you calculate this: How to Calculate Force to Find the Right Linear Actuator
Yes, this is possible. However, it does depend on the units you are currently using. To synchronize actuators, they require a form of feedback such as a potentiometer or hall effect sensors. For more information, see below some of our key content regarding linear actuator synchronization.
The control box you choose should be able to provide sufficient voltage and current rating to your actuator. If you are unsure of the specifications, please contact us.
Alternatively, you can also find compatible control boxes on your selected linear actuator's product page.
Backdriving is when an actuator starts sliding down under load, when it is either overloaded or when the actuator has been damaged. Watch the video.
What Does Dynamic and Static Load Ratings Mean?Dynamic load rating is the amount of weight an actuator can pull or push safely when being powered. Static load rating is the amount of weight the actuator can hold or withstand without back driving when it is not being powered. For example, let's just say you have an actuator installed on a window and the static load rating of the actuator is 100lbs, it could experience backdriving when there is a high wind event, which means there will be more pressure exerted on the actuator which would exceed the 100lbs load rating of the actuator.
What Is Lateral Loading?Lateral loading is when the actuator experiences forces from the lateral plane. Actuators are not meant to handle lateral forces at all so if it experiences any lateral forces, it will likely damage the actuator or bend the rod. So it's advised never to use lateral forces and always make sure the actuator is fully in line or in sync with your application, so it does not take any load other than the axial load. Watch the video.