12 VDC - 20A Control Box - 1 Channel - Wireless Remote
Μετάβαση στις πληροφορίες προϊόντος
1 του 7

12 VDC - 20A Control Box - 1 Channel - Wireless Remote

12 VDC - 20A Control Box - 1 Channel - Wireless Remote

Μοντέλο: PA-31

Σε απόθεμα
Αποστέλλεται εντός 24 ωρών
Έκπτωση όγκου
1-6 μονάδες €65,95 EUR
7-9 μονάδες €63,31 EUR
10-19 μονάδες €59,79 EUR
20+ μονάδες €46,60 EUR
Κανονική τιμή €65,95 EUR
Κανονική τιμή €80,95 EUR Τιμή πώλησης €65,95 EUR
Πώληση Εξαντλημένα

Η τιμή εμφανίζεται σε [νόμισμα] · Τα έξοδα αποστολής περιλαμβάνουν ΦΠΑ και εισαγωγικούς δασμούς

  • Get Free Actuator Guide
  • Replacement chart
Δείτε όλες τις λεπτομέρειες
Περιγραφή
PA-31 Specifications

The PA-31 is our most popular control box for controlling linear actuator(s). Using the RF remote provided, users have the ability to extend, stop, and retract their actuators from up to 30-50 feet away (open air). The control box has both momentary and non-momentary capabilities as well as an in-line fuse to protect against short circuits.

Using the included wire harness, connect the linear actuator(s) to the control box. Apply 12VDC across the power wires and the system is now ready to use. It is important to ensure that the power supply has a sufficient amperage rating to control the linear actuators. The PA-31 is designed to handle a maximum of 20A.

Please see the PA-31 Data Sheet for information about controls, wiring, and troubleshooting. This unit is compatible with all of our linear actuators, however, for actuators with a higher than 12A current rating, modifying the wiring harness to a thicker gauge is recommended.

* For 12 VDC actuators with a higher than 12A current rating, using relays or modifying the wiring harness to a thicker gauge is recommended.

Επισκόπηση
PA-31 Specifications

The PA-31 is our most popular control box for controlling linear actuator(s). Using the RF remote provided, users have the ability to extend, stop, and retract their actuators from up to 30-50 feet away (open air). The control box has both momentary and non-momentary capabilities as well as an in-line fuse to protect against short circuits.

Using the included wire harness, connect the linear actuator(s) to the control box. Apply 12VDC across the power wires and the system is now ready to use. It is important to ensure that the power supply has a sufficient amperage rating to control the linear actuators. The PA-31 is designed to handle a maximum of 20A.

Please see the PA-31 Data Sheet for information about controls, wiring, and troubleshooting. This unit is compatible with all of our linear actuators, however, for actuators with a higher than 12A current rating, modifying the wiring harness to a thicker gauge is recommended.

* For 12 VDC actuators with a higher than 12A current rating, using relays or modifying the wiring harness to a thicker gauge is recommended.

Προδιαγραφές προϊόντος
Δυνατότητα ελέγχου:
Πολλαπλοί ενεργοποιητές ταυτόχρονα
Τάση εισόδου:
12 VDC
Βάρος μονάδας:
0.45 lbs
Ισχύς εξόδου:
12 VDC
Ρεύμα:
20 Αμπέρ
Το κιτ περιλαμβάνει:
2 τηλεχειριστήρια χειρός, 1 κουτί ελέγχου, καλωδίωση
Λειτουργίες τηλεχειρισμού:
πάνω, κάτω, παύση (τόσο στιγμιαία όσο και μη στιγμιαία)
Τύπος μπαταρίας τηλεχειριστηρίου:
2 x CR2016 3V μπαταρία λιθίου
Μέγεθος:
3,5 ίντσα x 1,1 ίντσα x 2,7 ίντσα
Επιλογή τροφοδοσίας AC:
με AC-15, PS-13-12, PS-20-12, PS-20-12-67, PS-40-12
18 μήνες
Συμβατότητα κουτιών ελέγχου
Τεχνικές πληροφορίες

Following a set of standards is crucial for businesses to ensure their products and services can meet a level of quality that promotes customer satisfaction. At Progressive Automations, we aim for nothing but the best for our customers and strive toward continual improvements. Because of this, we are excited to announce that Progressive Automations is now ISO 9001:2015 certified!

Quality Assured

Φύλλα δεδομένων

PA-31 Φύλλο δεδομένων

Data Sheet for PA-31

Θέα
Βίντεο & Άρθρα
Βίντεο
Σχετικά άρθρα ιστολογίου:
How To Automate Your Trap Door Application

Πώς να αυτοματοποιήσετε την εφαρμογή της καταπακτής σας

Nathan Bong

Μια καταπακτή είναι μια συρόμενη ή αρθρωτή πόρτα, στο ίδιο επίπεδο με την επιφάνεια ενός δαπέδου,...

Μάθετε περισσότερα Πώς να αυτοματοποιήσετε την εφαρμογή της καταπακτής σας
Photo of relays to control high current actuator with low current control box
Photo of the prototype system for automated Phantom BBQ

Χορηγία: Αναφορά προόδου για το Phantom BBQ του Dr. Decks

Jake Hewer

Ο Dr. Decks είναι εδώ και πολύ καιρό ένας από τους πιο πολύτιμους πελάτες μας και έχουμε συνεργασ...

Μάθετε περισσότερα Χορηγία: Αναφορά προόδου για το Phantom BBQ του Dr. Decks
Συχνές ερωτήσεις
Ποιοι τύποι ενεργοποιητών είναι συμβατοί με το PA-31 και πότε είναι απαραίτητη η τροποποίηση της πλεξούδας καλωδίωσης;

Most 12V actuators with 2-wire operated brushed DC motors are compatible; however, a wiring harness upgrade for thicker gauge wires is required for actuators that draw over 12A of current. 

Ποια είναι η προτεινόμενη διάταξη τροφοδοτικού για το PA-31 και πώς διασφαλίζω την ορθή παροχή ρεύματος;

Select a 12 VDC power source that can handle the actuator current draw requirements for your use case and upgrade the wire harness as necessary for current draw over 12A.

Ποιες είναι οι δυνατότητες τηλεχειρισμού του PA-31 και ποια είναι η εμβέλειά του σε ανοιχτό χώρο;

The PA-31 is a wireless actuator control box with a 30-50 ft range in open air with the RF actuator remote for extending, retracting, and stopping actuator motion.  

Πώς αλλάζω μεταξύ λειτουργιών στιγμιαίας και μη στιγμιαίας στο PA-31;

Changing between momentary and non-momentary actuator control modes requires access inside the enclosure. Once you have access, follow the steps below:

Momentary Mode

  • Ensure the Jumper S1 on the PCB is connected
  • Hold UP to extend the actuator, let go to stop the actuator
  • Hold DOWN to retract the actuator, let go to stop the actuator

Non-Momentary Mode

  • Ensure the Jumpers S1 on the PCB is disconnected
  • Press UP to extend the actuator, Press UP again to stop the actuator
  • Press DOWN to retract the actuator. Press DOWN again to stop the actuator
  • If DOWN is pressed while the actuator is extending, it will reverse direction and begin to retract
Ποιοι μηχανισμοί ασφαλείας είναι ενσωματωμένοι στο PA-31 για προστασία από ηλεκτρικά σφάλματα όπως βραχυκυκλώματα ή υπερφορτώσεις;

The PA-31 has an inline fuse that opens when there is a short or a significant spike in current to help protect the controller and actuators, mainly as short circuit protection.

Recently Viewed