How to Evaluate a Custom Linear Actuator Supplier

How to Evaluate a Custom Linear Actuator Supplier

Finding a custom linear actuator supplier is about more than selecting a manufacturer that can meet your force and stroke requirements. The right supplier should understand your application, offer practical customization options, provide reliable technical documentation, and support your project from initial testing through ongoing production.

For OEM manufacturers, product developers, engineers, and procurement teams, choosing a supplier is both a technical and commercial decision. A custom actuator that works in a prototype must also be suitable for the intended operating conditions, integrate with the surrounding system, and remain practical to source as production volumes increase.

Some projects can use an existing actuator with a small modification. Others require a completely new design. These approaches can have very different implications for development time, minimum order quantities, pricing, and long-term support.

This guide explains how to evaluate custom linear actuator suppliers, compare customization and bulk-order options, review warranty terms, and determine which sourcing approach makes sense for your application.

Explore Custom Designs and Volume Orders

Browse Linear Actuators

Contact Progressive Automations

Selection Criteria and Constraints

Quick answer: Evaluate suppliers based on technical capabilities, customization flexibility, engineering support, testing, production requirements, total cost, and warranty terms. Start with your application requirements before comparing quotations.

Define Your Actuator Requirements First

Before contacting manufacturers, prepare a technical specification describing what the actuator must do.

This helps suppliers determine whether an existing product can meet your needs or whether modifications are required.

It also makes quotations easier to compare.

Specification What to Confirm Why It Matters
Dynamic force Maximum required pushing or pulling force Determines whether the actuator can move the load
Static force Load the actuator must withstand when stopped Important for load-holding applications
Stroke length Total required extension and retraction travel Determines the movement range
Retracted length Available space between mounting points Ensures the actuator fits the mechanism
Speed Required movement time under load Affects operating performance
Duty cycle Frequency and duration of operation Helps prevent overheating
Voltage and current Available electrical supply and motor requirements Determines electrical compatibility
Feedback Hall-effect, potentiometer, or other required signals Supports position monitoring and compatible control
Mounting Brackets, pin dimensions, and installation geometry Affects mechanical integration
Environment Temperature, dust, moisture, and other exposure Helps determine protection requirements

A supplier should be able to review these requirements and identify potential conflicts.

For example, increasing force capacity may affect operating speed. Changing the stroke length can alter the actuator's overall dimensions. Adding feedback may require a compatible controller and different wiring.

These trade-offs should be understood before approving the product.

If you are still defining your requirements, Progressive Automations' Linear Actuator Calculator can help with initial sizing. Final specifications should be validated against the actual mechanism and selected actuator.

Understand the Difference Between Standard, Modified, and Fully Custom Actuators

Not every application requires a completely new actuator design.

There are three common approaches.

Standard actuators are existing products available in published configurations. They are often the simplest option when the required force, stroke, speed, voltage, and dimensions already match the application.

Modified standard actuators use an existing product platform with approved changes to suit a particular project. These may involve mounting details, cable arrangements, connectors, or other characteristics within the actuator's technical capabilities.

Clean-sheet custom actuators are developed around requirements that cannot be satisfied through an existing product.

A new design may provide greater flexibility, but it can also involve additional engineering, testing, tooling, and production commitments.

For many OEM projects, evaluating existing actuator platforms first is a practical way to limit unnecessary development work.

Evaluate the Supplier's Engineering Capabilities

A custom actuator manufacturer should be able to explain how it evaluates your design and determines whether the proposed solution is feasible.

Important questions include:

  • Can the supplier review your drawings and operating requirements?

  • Are technical datasheets and dimensional drawings available?

  • Can the proposed actuator be tested under representative loads?

  • What development or validation steps are required?

  • Can prototypes be evaluated before production?

  • How are design revisions documented?

  • What support is available if integration problems occur?

A supplier that provides detailed technical information can help your team identify issues before they become expensive production changes.

However, engineering support and testing capabilities vary by manufacturer. Ask what is actually included in the quotation rather than assuming every supplier provides the same services.

Compare Suppliers by Capabilities, Not General Rankings

When researching custom linear actuator manufacturers in the United States, it is useful to distinguish between different areas of specialization.

Several established suppliers publicly describe customized actuator solutions.

Supplier Documented Customization Capabilities Worth Evaluating For
Progressive Automations Standard actuators, modified existing units, clean-sheet OEM designs, and volume-order support OEM products, general linear motion, and applications using existing electric actuator platforms
Thomson Custom stroke and retracted lengths, mounting arrangements, feedback, connectors, and motor configurations Industrial equipment, specialized actuator configurations, and existing-equipment replacements
Tolomatic Custom electric and pneumatic actuators, engineering development, prototyping, and testing Industrial machinery and engineered motion systems
Actuonix Motion Devices Modified micro actuators, custom wiring, rod tips, and application-specific designs Compact products, robotics, and small-scale automation

These examples illustrate publicly documented capabilities. They are not a ranking of reliability, manufacturing quality, pricing, or customer satisfaction.

For example, a supplier specializing in compact micro actuators may be suitable for a consumer product but not for heavy industrial equipment.

Similarly, a manufacturer offering sophisticated industrial motion systems may provide capabilities that are unnecessary for a relatively simple OEM application.

The best supplier is the one whose documented capabilities and commercial terms align with your project's requirements.

Compare Total Project Cost, Not Just Unit Price

Custom actuator pricing depends on the design, quantity, testing requirements, production process, and additional services.

A lower unit price may not provide the lowest overall cost.

When comparing quotations, consider:

Cost Category What to Check
Actuator unit price Price for the exact approved configuration
Development Engineering and design charges
Tooling Any new molds, fixtures, or dedicated tooling
Prototyping Evaluation units and testing costs
Integration Required controllers, brackets, cables, or adapters
Quality requirements Inspection, validation, and documentation
Logistics Freight, duties, packaging, and delivery arrangements
Support Replacement parts, warranty handling, and technical assistance

Request comparable quotations at the quantities relevant to your project.

For example, a company developing a product may need a few engineering samples before ordering 50 units for a pilot run and eventually several hundred units for production.

A supplier's pricing structure may change at each stage.

Do not assume that published retail volume discounts apply to customized products. Custom pricing should be confirmed through a project-specific quotation.

Ask About Warranty and After-Sales Support

Warranty terms are particularly important when actuators become part of a larger product sold to customers.

Before selecting a supplier, confirm the warranty that applies to the specific configuration.

Useful questions include:

  • How long does the warranty last, and when does it begin?

  • Does it cover the approved custom modifications?

  • Which defects and operating conditions are covered?

  • Are there exclusions for improper installation or operation outside rated limits?

  • What happens when a component fails?

  • Are repairs, replacements, or spare parts available?

  • Who is responsible for return shipping and inspection costs?

  • Will the supplier support future revisions or discontinued parts?

A standard actuator warranty does not necessarily apply unchanged to every custom configuration.

Ask for the applicable terms in writing before approving production.

Verified Progressive Automations Options and Compatibility

Quick answer: Progressive Automations supports three sourcing approaches: stocked actuator configurations, modifications to existing units, and clean-sheet OEM designs. The appropriate option depends on how closely an available actuator platform matches your application.

Progressive Automations Custom and OEM Order Options

The Progressive Automations Custom Designs and Volume Orders program outlines the following options.

Order Type Minimum Order Development Time Development Fees
Standard units None Zero, in stock None
Customized existing units None Up to 8 weeks No development fee; air freight may apply
Clean-sheet designs 1,000+ units Depends on specifications Development and mold fees may apply

These terms help customers understand the available sourcing pathways.

They should not be interpreted as guaranteed production lead times, fixed custom actuator prices, or confirmation that every modification is technically possible.

A customized existing unit must remain within the capabilities of the selected actuator platform.

For clean-sheet development, the design, manufacturing requirements, and commercial conditions must be reviewed separately.

Choosing an Existing PA Actuator Platform

An existing product may already meet most of your application's requirements.

Progressive Automations offers actuator families covering compact, general-purpose, and heavy-duty applications.

Product Family Published Standard Specifications Potential Starting Point
PA-MC3 Micro Actuator 12 VDC, 0.4–4" strokes, 6–27 lbs dynamic force, IP54 Compact devices and low-force mechanisms
PA-01 Mini Actuator 12/24 VDC, 1–40" strokes, up to 225 lbs dynamic force, IP65 General-purpose OEM equipment and moderate-force applications
PA-HD3B Heavy-Duty Actuator 12/24 VDC, 4–24" strokes, 3,822 lbs dynamic force, IP67 High-force industrial mechanisms

These specifications describe existing products. Whether an individual platform can support a requested modification must be confirmed by Progressive Automations.

PA-MC3: A Starting Point for Compact Products

The PA-MC3 is designed for applications where installation space is limited.

Its specifications include a 12VDC brushed motor, built-in limit switches, a compact construction, and force options from 6 to 27 lbs.

The stock actuator uses a two-wire connection and does not provide position feedback.

For an OEM developing compact equipment, the PA-MC3 may provide a starting point when the standard dimensions and force range meet the application's requirements.

If the product requires specialized electrical connections, additional feedback, or other changes, their feasibility must be reviewed before specifying a custom version.

PA-01: A Flexible General-Purpose Platform

The PA-01 offers multiple force, stroke, and voltage configurations.

It is available with standard operation and in selected Hall-effect or potentiometer-feedback configurations.

This makes the product family worth evaluating when an OEM project needs moderate-force movement with a choice of control arrangements.

For example, an equipment manufacturer may find that a standard PA-01 meets the required force and travel but needs a different connection arrangement.

Rather than immediately commissioning a new actuator, the manufacturer can ask Progressive Automations whether the necessary changes are feasible within the existing platform.

Any proposed change should be reviewed against the actuator's electrical, dimensional, and operating requirements.

PA-HD3: High-Force Industrial Applications

The PA-HD3 family supports more demanding applications requiring greater operating force.

The PA-HD3B uses a ball-screw mechanism and provides a dynamic force rating of 3,822 lbs.

It is available in 12VDC and 24VDC configurations, with stroke options from 4 to 24 inches.

Its cable length is 40" for stock versions and is also customizable for custom orders.

For high-force OEM applications, however, you must evaluate the complete system. This includes mounting, structural loads, electrical supply, duty cycle, and operating conditions.

The PA-HD3B is not rated for shock or pulse loads. A project involving frequent impacts or dynamic shocks may require another type of motion system.

Verify Controllers, Feedback, and Mechanical Compatibility

A custom actuator is only one component of the complete mechanism.

Changes to an actuator can also affect the components used to power, mount, and control it.

For example, a Hall-effect feedback actuator requires a controller capable of interpreting the appropriate signals.

A different motor configuration may change current requirements. A modified mounting arrangement may require different brackets or additional structural support.

Before approving the design, verify compatibility across the complete system:

  • Actuator voltage and current requirements.

  • Power supply capacity.

  • Control box or motor-driver compatibility.

  • Feedback signals and electrical connections.

  • Mounting geometry and brackets.

  • Wiring, connector pinout, and cable routing.

Progressive Automations also offers Control Systems, Mounting Brackets, and Power Supplies that can be evaluated alongside the selected actuator.

Support for Bulk Orders and OEM Production

For manufacturers, the sourcing relationship often continues after the first successful prototype.

Progressive Automations' OEM program describes services including vendor-managed inventory and yearly blanket orders.

These arrangements may help customers manage recurring component demand and plan replenishment around production schedules.

Availability, pricing, inventory commitments, and delivery terms should be confirmed for the specific project.

For customers with U.S. sourcing requirements, it is also important to distinguish between a supplier serving the U.S. market and products manufactured in the United States.

Progressive Automations offers selected Canadian-made products alongside products sourced through other manufacturing arrangements. Country of origin should be confirmed for the exact actuator configuration when it is a purchasing requirement.

Worked Example or Comparison Table

Quick answer: A practical supplier comparison starts with a real application, an expected production quantity, and a consistent quotation request. The goal is to identify which supplier can meet the requirements with the least unnecessary technical and commercial complexity.

Example: Sourcing an Actuator for an OEM Equipment Project

Consider a U.S. equipment manufacturer developing a powered adjustment mechanism.

The company plans to build approximately 300 units annually after completing prototype and pilot testing.

The initial requirements are:

Requirement Example Specification
Application Powered equipment adjustment
Operating voltage 24 VDC
Required stroke 8 inches
Estimated maximum operating force 125 lbs
Position feedback Hall-effect sensors
Environmental protection IP65
Electrical connection Application-specific connector
Expected annual volume 300 units
Development stage Engineering prototype

This example is illustrative. It does not represent a confirmed project or approved product configuration.

Step 1: Identify a Suitable Existing Actuator

The PA-01 Hall-effect actuator family offers a potential starting point.

In-stock configurations include 24VDC operation, an 8-inch stroke, Hall-effect feedback, and force ratings including 169 lbs and 225 lbs.

A 169 lbs configuration exceeds the example's preliminary 125 lbs operating-force requirement.

However, the final design must still account for load variation, an appropriate force margin, speed, duty cycle, mounting dimensions, and electrical compatibility.

The selection cannot be approved based on force and stroke alone.

Step 2: Evaluate the Required Modification

In this example, the electrical connector is the main requirement that differs from an existing standard configuration.

The manufacturer should provide the supplier with the connector type, pinout, cable requirements, and any environmental sealing requirements.

Progressive Automations can then review whether the requested connection arrangement is feasible as a modification to the existing product.

If feasible, the supplier would confirm the approved configuration and applicable commercial conditions.

If not, the manufacturer may need an approved external adapter, a different actuator platform, or a more extensive design change.

Step 3: Compare the Sourcing Approaches

Sourcing Approach Potential Advantage Main Consideration
Standard actuator with approved adapter Uses an existing product configuration Requires additional wiring and interface validation
Modified existing actuator May provide the desired connector within a proven platform Subject to technical feasibility and quotation
Clean-sheet actuator Allows a design developed around specific requirements Greater engineering commitment and minimum-order considerations

With annual demand estimated at 300 units, reviewing standard and modified existing products first is a reasonable approach.

Progressive Automations' minimum for clean-sheet designs is 1,000+ units, which is above this example's annual forecast.

A clean-sheet project would therefore require a separate discussion about total production commitments and commercial feasibility.

Step 4: Compare Bulk Pricing at Different Quantities

Instead of requesting only one price, ask suppliers to quote quantities corresponding to each development stage.

Quote Quantity Purchasing Purpose
2–5 units Engineering evaluation
25 units Pilot production
100 units Initial production
300 units Estimated annual requirement
1,000 units Potential future volume

These are illustrative quotation quantities, not published PA pricing tiers or order minimums.

Each supplier may have different quantity breaks, development terms, and production requirements.

Request separate figures for recurring unit costs, any non-recurring engineering or tooling charges, shipping, and required testing.

Step 5: Evaluate Total Cost of Ownership

Consider two hypothetical supplier proposals.

Supplier A offers an existing actuator platform that needs a connector modification.

Supplier B proposes developing a new actuator configuration.

Supplier B may eventually offer an attractive unit price, but the initial project could require additional engineering, tooling, or validation.

Supplier A may have fewer upfront requirements, although its unit price or configuration may differ.

Without actual quotations, it is not possible to conclude which supplier is more economical.

A useful comparison considers:

Total project cost = Unit costs + Development and tooling + Integration + Testing + Logistics + Expected support costs

Also evaluate delivery terms, spare-part availability, and whether the approved configuration can be ordered consistently across future production batches.

Step 6: Validate the Product Before Production

Before approving a bulk order, test the proposed actuator in the actual equipment.

Confirm that it meets the required force, stroke, speed, and operating conditions.

Review electrical performance, feedback signals, mounting, and the behavior of the complete system.

For production-critical applications, establish acceptance criteria and document the configuration that has been approved.

A successful prototype is an important milestone, but the broader production arrangement should also address consistent manufacturing, inspection, and any required design-change controls.

Supplier Evaluation Scorecard

The following scorecard can help buyers compare shortlisted vendors using the same criteria.

Evaluation Category Suggested Weight
Technical fit and application suitability 30%
Customization and engineering capabilities 20%
Total project cost 20%
Production capacity and delivery planning 15%
Warranty and technical support 10%
Documentation and quality processes 5%
Total 100%

The weights are an illustrative procurement framework, not independently established supplier ratings.

Adjust them according to your project. A safety-critical industrial application may place greater emphasis on engineering validation, while a high-volume consumer product may prioritize repeatable production and total cost.

Score suppliers only after reviewing comparable proposals and supporting documentation.

Limitations and Unsuitable-Use Cases

Quick answer: Customization cannot automatically overcome an actuator platform's mechanical, electrical, or operating limits. Some applications require a different product architecture or additional engineering beyond a standard custom-order service.

When a Modified Standard Actuator Is Not Enough

Changing a connector or mounting arrangement can be fundamentally different from redesigning a motor, screw mechanism, or complete actuator housing.

If the application requires major changes to operating force, precision, dimensions, or performance, an existing platform may not be suitable.

Ask the supplier to identify which requirements can be met through modifications and which would require a new design.

High-Duty-Cycle or Continuous-Motion Applications

Many standard electric linear actuators use brushed DC motors with defined duty-cycle limitations.

An actuator designed for intermittent movement should not be assumed capable of operating continuously.

For high-frequency production equipment or continuous-duty applications, a different actuator architecture may be more suitable.

Always compare the actual operating cycle with the manufacturer's published limits.

Precision and Positioning Requirements

Position feedback and positioning accuracy are related but different requirements.

Hall-effect sensors or potentiometers can provide feedback for compatible control systems.

However, a feedback-equipped actuator does not automatically provide the positioning accuracy, repeatability, or dynamic response of a precision servo system.

If the application requires tight tolerances, specify those requirements numerically and ask the supplier to document how they will be verified.

Environmental and Safety Requirements

IP ratings describe protection against specified dust and water exposure conditions.

They do not automatically establish protection to every chemical, corrosive/saltwater environment, extreme temperature, or industrial cleaning process. 

Applications involving hazardous machinery, medical equipment, or personnel safety may also require additional system-level testing, corrosion resistance, and certifications.

These requirements should be included in the initial specification rather than addressed after the actuator has been selected.

Custom Order Returns and Warranty Conditions

Commercial terms may differ between standard retail products and custom orders.

Progressive Automations' custom-order products are generally non-returnable, except for applicable warranty claims.

Our stock linear actuator warranty is 18 months from shipment under our published terms.

However, buyers should confirm how the warranty applies to the specific modified or custom configuration, including any project-specific conditions.

Review the Progressive Automations Warranty Terms and Sales Terms before placing a custom order.

Frequently Asked Questions

Who are the top custom linear actuator suppliers?

Progressive Automations, Thomson, Tolomatic, and Actuonix are examples of suppliers offering publicly documented actuator customization services.

There is no universal ranking that applies to every application. The appropriate supplier depends on the required force, size, precision, production quantity, customization scope, and support requirements.

What should I look for in a custom linear actuator manufacturer?

Prioritize technical compatibility, engineering support, documentation, testing, production capabilities, and total sourcing cost.

A supplier should also be able to explain its modification limits, lead times, and warranty conditions before you commit to production.

How do I compare custom linear actuator vendors in the United States?

Send each shortlisted supplier the same technical requirements and estimated order quantities.

Then compare their proposed configurations, engineering assumptions, total costs, delivery terms, testing procedures, and support commitments.

If U.S. manufacturing or domestic-content requirements apply, verify the origin of the exact product rather than relying only on the supplier's location.

How much does a custom linear actuator cost?

There is no standard price for every custom actuator.

Costs depend on the selected platform, performance requirements, modification scope, quantity, testing, and logistics.

Request a project-specific quotation that distinguishes recurring unit costs from any one-time engineering or tooling charges.

Are custom linear actuators cheaper in bulk?

Per-unit pricing may improve with larger order quantities, but the actual discount depends on the supplier and product.

A custom project may also have development, testing, or tooling costs that affect the overall economics.

Compare the total cost at your expected production volumes rather than assuming the largest quantity provides the best commercial outcome.

Does Progressive Automations require a minimum order for custom actuators?

Our OEM program has no minimum order for modifications to existing units within our technical capabilities.

Clean-sheet designs have a minimum of 1,000+ units.

All requests remain subject to technical review and quotation.

How long does it take to develop a custom actuator?

Development time depends on the required changes.

Progressive Automations development of customized existing units can take up to eight weeks. Development time for clean-sheet designs depends on the project specifications.

Production schedules and shipping requirements should be confirmed separately.

Can a custom actuator include special connectors or mounting dimensions?

Potentially. These types of modifications may be available through suppliers offering custom actuator services.

Feasibility depends on the selected product and the requested changes. Provide drawings and complete electrical specifications so the supplier can review the requirements.

What warranty should I expect when ordering custom actuators?

Ask for written warranty terms covering the exact configuration.

Progressive Automations offers an 18-month standard warranty for linear actuators. Any additional or different conditions for a custom project should be confirmed in the quotation or supply agreement.

Can I order prototypes before committing to bulk production?

Prototype and engineering evaluation arrangements depend on the supplier and project.

Before placing an order, confirm whether evaluation units are available, what they cost, which specifications they represent, and what testing will be required before production approval.

Can I use an existing actuator as the basis for a custom design?

Yes, when the original platform meets the main application requirements and the remaining changes fall within its capabilities.

An approved modification may be more practical than developing a completely new product, but the supplier must confirm feasibility.

What information should I include in a custom actuator quote request?

Provide force, stroke, voltage, speed, duty cycle, mounting dimensions, feedback requirements, electrical connections, environmental conditions, and expected quantities.

Include drawings, information about the existing controller, desired delivery dates, and any testing or certification requirements.

This helps suppliers evaluate the same project requirements and provide more meaningful quotations.

Choosing a Custom Actuator Supplier for Your Next Project

A custom linear actuator supplier should be evaluated as a long-term engineering and production partner, not simply a source of individual components.

Start with a clear technical specification. Determine whether an existing actuator platform can meet your needs. Then compare suppliers based on documented capabilities, development requirements, total cost, production planning, and support.

For many projects, selecting an existing actuator with an approved modification may provide a practical path from prototype to production. More specialized requirements may justify a clean-sheet design.

Progressive Automations offers standard actuators, custom-order options, and OEM volume-order support to help manufacturers evaluate different linear motion solutions.

Whether you're developing a new product or sourcing actuators for ongoing production, our team can review your specifications and help identify available options.

Explore Custom Designs and Volume Orders

Browse Linear Actuators

Contact Progressive Automations

Natan Bong

Ingeniero técnico en Progressive Automations y Progressive Desk
Nathan Bong es ingeniero técnico en Progressive Automations y Progressive Desk, donde aplica su experiencia práctica en ingeniería para producir documentación técnica, guías de aplicación, fichas técnicas, manuales de usuario y estudios de caso sobre movimiento lineal y automatización. Graduado del programa de Ingeniería Eléctrica e Informática del BCIT, y ganador del Premio de Ingreso del Presidente del BCIT y del Premio al Mérito en Automatización del BCIT, Nathan aporta una perspectiva de ingeniería práctica y sólida a cada artículo que escribe. Su trabajo abarca diagramas de cableado, guías de selección de actuadores, integración de PLC, clasificaciones IP, análisis del ciclo de trabajo y demostraciones prácticas de la construcción de sistemas de automatización. Su proyecto práctico más reciente es un brazo robótico exoesqueleto personalizado construido con actuadores lineales de Progressive Automations, un proyecto que refleja su enfoque integral: comprender los problemas de ingeniería que enfrentan sus lectores resolviéndolos directamente. Fuera de la oficina, Nathan construye proyectos de actuadores lineales caseros, personaliza y modifica automóviles y entrena en el gimnasio.