IP66 kompakt rörformad ställdon
Mikroprecisionsservoaktuator - TTL/PWM
Mikroprecisionsservoaktuator - RS-485
Spänning
Stroke
Tvinga
IP-klassificering
Feed-back
PA-MC1
Inga
PA-07
Inga
PA-MC2
Inga
PA-ST5
Inga
PA-12-T
Ja
PA-12-R
Ja
Applikationer
Robotik
Våra mikrolinjära ställdon används i en mängd olika robotsystem. Dessa sträcker sig från tillverkningssystem där ett mikroställdon är en kärnkomponent i en större mekanism, till att assistera inom medicinska områden. Mikrolinjära ställdon i robotar är en växande och spännande industri som bara kommer att bli mer och mer avancerad.
Medicinsk industri
Mikroprecisionsservoställdon har många olika användningsområden inom medicinindustrin eftersom de erbjuder tillförlitlig noggrannhet och repeterbarhet, oavsett om det gäller att justera vätskeflödet i dispensrar, driva kirurgiska robotar eller positionera medicinsk utrustning. Deras höga prestanda i kombination med låga underhållskrav är några av de viktigaste anledningarna till att mikroställdon är populära inom... medicinsk industri.
Hemautomation
Ett mikroelektriskt linjärt ställdon kan installeras i flera delar av ditt hem och kontor för att optimera och automatisera dem där det är möjligt. Skåp och hyllor är populära applikationer som kan automatiseras, vilket gör att hyllan kommer till dig istället för att nå eller flytta rack i ett skåp för att optimera utrymmet.
Let customers speak for us
This is the second Progressive actuator I have purchased this year. Both have appeared to be quality products. This one was for my Gator TS. The retracted length was perfect, but I had to modify the mounting point on the frame because the PA17's mounting rod had a bolt in it that interfered with the installation. The limit switches were easy to adjust. Hopefully this thing lasts a long time.
I haven't used it yet but the quality of the actuator looks top notch.
Needed a replacement hand held remote control for my trolling motor control. Price seemed reasonable. received the remote in just a few days. Did not receive programing instructions with the shipment Called tech support, they were very helpful and emailed instructions along with a video.
Instructions would have been nice to have included with the remote but all in all a good experience. Thanks
Worked perfect with the pa hd2 actuator. Used to add a power cart dump on my club car carryall 252 golf cart.
Great I’m sure I almost have it installed I needed to learn how to install actuator I finally used your calculator this is first time installer I need to learn the sizing better I think mine is longer than I need but wil work I think
Had to replace a 25 year old actuator on my boat and this was almost an exact fit. The motor housing was just slightly larger than the original but it worked out fine. It is SUPER quiet when operating as well.
These work great for extending the control away from actuators for custom builds. they are well built, the wire is small and the head is minimal. Which is what i was after. Mine happened to be a bed lift in an RV. I did have to purchase a number of them though, I would like to have seen an option for a 12 or 15ft option. - if your thinking of building your own from amazon bit to save some money, DONT. These are high quality, minimal and unless you build cables for a living, you wont build them for less or better.
Correct fit and good price. A lower shipping price option would help.
I’m currently working on an antenna tower project that I need to modify the top portion of my tower to allow me to work on the antenna while the tower is laying on the ground.
I cut the top 9 foot section in half and welded a hinge plate to the two half’s. I installed the actuator inside the lower section to push the top half up to 90 degree angle to allow me to install and work on the antenna while on the ground.
The actuator so for, is working perfectly!! I still have to finish the project but the actuator is doing its job very well.
This TV lift fit the parameters of my build perfectly. It was very easy to set up and operate. I was very impressed with how quiet it is and really like having the 2 different control options. Great product!
Purchased a unit for my Gator, I went with. 6” lift and drilled new holes in the Gator frame. Working good!
Customer Service is good!
I ordered an actuator and it shipped the same day. Good price. Have not tested but will soon.
Excellent product very quiet and Love Love how responsive the remote is.
Needed to replace an actuator for a tilt bed in a unique application. I was having trouble finding a good fit online until I found these guys. Spoke to customer service and they answered all of my questions. Install was easy and the actuator is very quiet.
Nyheter
Visa alla-
Introducing the PA-CB Series: Designed and Built in Canada
Joanne FajardoNot all control boxes are created equal. Meet the PA-CB series — Canadian-designed actuator control boxes built for precision, reliability, and ease of use. Here's the full lineup and how to choose the right one for your application.
-
Introducing The High Current Dual Channel PA-CB41-2 Control Box
Nathan BongWe’re excited to announce the release of our PA-CB41-2 control box, specialized as a high-power a...
-
Introducing the PA-HD3A-HS Hall Heavy Duty Linear Actuator
Nathan BongLearn about the PA-HD3A-HS Hall Heavy Duty Linear Actuator benefits, specs, and real-world applications in industrial, agricultural, and automation setups.
