Ultrakompaktní mikro lineární aktuátor 12V
Kompaktní mikro lineární aktuátor s PWM kompatibilitou
Mikro lineární aktuátor s krytím IP65
Mikro lineární aktuátor
Kompaktní trubkový aktuátor s krytím IP66
Mikro přesný servopohon - TTL/PWM
Mikro přesný servopohon - RS-485
Napětí
Mrtvice
Platnost
Krytí IP
Zpětná vazba
PA-MC3
PA-MC2
PA-MC1
PA-07
PA-ST5
PA-12-T
PA-12-R
Aplikace
Robotika
Naše mikro lineární aktuátory se používají v celé řadě robotických systémů. Ty sahají od výrobních systémů, kde je mikro aktuátor klíčovou součástí většího mechanismu, až po pomocné systémy v lékařství. Mikro lineární aktuátory v robotech jsou rostoucím a vzrušujícím odvětvím, které se bude dále rozvíjet.
Lékařský průmysl
Mikropřesné servopohony mají mnoho různých využití v lékařském průmyslu, protože nabízejí spolehlivou přesnost a opakovatelnost, ať už se jedná o nastavení průtoku kapalin v dávkovačích, řízení chirurgických robotů nebo polohování lékařského vybavení. Jejich vysoký výkon v kombinaci s nízkými nároky na údržbu je jedním z klíčových důvodů, proč jsou mikropohony oblíbené v... lékařský průmysl.
Domácí automatizace
Mikroelektrický lineární aktuátor lze instalovat do různých oblastí vašeho domova a kanceláře, aby se všude, kde je to možné, optimalizovaly a automatizovaly. Skříňky a police jsou oblíbenými aplikacemi, které lze automatizovat, takže police přijdou k vám, místo abyste museli sahat na regály ve skříni nebo je přemisťovat, a optimalizovat tak prostor.
Let customers speak for us
This is the second Progressive actuator I have purchased this year. Both have appeared to be quality products. This one was for my Gator TS. The retracted length was perfect, but I had to modify the mounting point on the frame because the PA17's mounting rod had a bolt in it that interfered with the installation. The limit switches were easy to adjust. Hopefully this thing lasts a long time.
I haven't used it yet but the quality of the actuator looks top notch.
Needed a replacement hand held remote control for my trolling motor control. Price seemed reasonable. received the remote in just a few days. Did not receive programing instructions with the shipment Called tech support, they were very helpful and emailed instructions along with a video.
Instructions would have been nice to have included with the remote but all in all a good experience. Thanks
Worked perfect with the pa hd2 actuator. Used to add a power cart dump on my club car carryall 252 golf cart.
Great I’m sure I almost have it installed I needed to learn how to install actuator I finally used your calculator this is first time installer I need to learn the sizing better I think mine is longer than I need but wil work I think
Had to replace a 25 year old actuator on my boat and this was almost an exact fit. The motor housing was just slightly larger than the original but it worked out fine. It is SUPER quiet when operating as well.
These work great for extending the control away from actuators for custom builds. they are well built, the wire is small and the head is minimal. Which is what i was after. Mine happened to be a bed lift in an RV. I did have to purchase a number of them though, I would like to have seen an option for a 12 or 15ft option. - if your thinking of building your own from amazon bit to save some money, DONT. These are high quality, minimal and unless you build cables for a living, you wont build them for less or better.
Correct fit and good price. A lower shipping price option would help.
I’m currently working on an antenna tower project that I need to modify the top portion of my tower to allow me to work on the antenna while the tower is laying on the ground.
I cut the top 9 foot section in half and welded a hinge plate to the two half’s. I installed the actuator inside the lower section to push the top half up to 90 degree angle to allow me to install and work on the antenna while on the ground.
The actuator so for, is working perfectly!! I still have to finish the project but the actuator is doing its job very well.
This TV lift fit the parameters of my build perfectly. It was very easy to set up and operate. I was very impressed with how quiet it is and really like having the 2 different control options. Great product!
Purchased a unit for my Gator, I went with. 6” lift and drilled new holes in the Gator frame. Working good!
Customer Service is good!
I ordered an actuator and it shipped the same day. Good price. Have not tested but will soon.
Excellent product very quiet and Love Love how responsive the remote is.
Needed to replace an actuator for a tilt bed in a unique application. I was having trouble finding a good fit online until I found these guys. Spoke to customer service and they answered all of my questions. Install was easy and the actuator is very quiet.
Zprávy
Zobrazit vše-
Introducing the PA-CB Series: Designed and Built in Canada
Joanne FajardoNot all control boxes are created equal. Meet the PA-CB series — Canadian-designed actuator control boxes built for precision, reliability, and ease of use. Here's the full lineup and how to choose the right one for your application.
-
Introducing The High Current Dual Channel PA-CB41-2 Control Box
Nathan BongWe’re excited to announce the release of our PA-CB41-2 control box, specialized as a high-power a...
-
Introducing the PA-HD3A-HS Hall Heavy Duty Linear Actuator
Nathan BongLearn about the PA-HD3A-HS Hall Heavy Duty Linear Actuator benefits, specs, and real-world applications in industrial, agricultural, and automation setups.
