WHAT IS SYNCHRONIZATION AND WHY WOULD YOU NEED IT?
What is synchronization? The concept is in the name: motion control devices being actuated in a ‘synchronized’ manner, and running at the exact same speed. The linear motion of multiple actuators are matched with each other to achieve complete synchronization. On the surface, synchronization can seem like an easy task. However, it can be entirely the opposite. Synchronization isn’t just achieved by wiring multiple actuators to the same switch, as many might presume – in an ideal world or a very simple setting, this might work. However, usually, it will result in multiple linear actuators moving at different speeds.
Even if two linear actuators of the same make and model are connected to the same power supply, a significant speed difference can occur if both are subjected to unequal loads, have experienced different wear and tear patterns, or are at different operating temperatures even, to mention a few problems. To achieve synchronized linear actuator movement, some form of motion control is a must. For an open-loop control system, the most popular synchronization option is a speed controller. A more sophisticated form of synchronized motion control is with a closed-loop system, which utilizes feedback from actuators to ascertain the individual needs of each device, making real-time adjustments. This form of synchronization is remarkably accurate, with no chance of error. There are multiple applications where linear actuator synchronization is a core requirement.
doğrusal aktüatör çözümleri
Geniş ürün yelpazemizde neredeyse her uygulama için uygun bir çözüm bulmanızı sağlayacak birçok özelleştirme seçeneğiyle, çeşitli gelişmiş kontrol üniteleri ve farklı aktüatör türleri sunuyoruz. Projenizi senkronize etmek için ideal çözümü bulmanıza yardımcı olalım!
Modüler kaldırma kolonları çözümleri
Elektrikli kaldırma kolonları, hemen hemen her sektördeki çeşitli uygulamalara fayda sağlayabilecek yüksek performans, güvenilirlik ve güvenlik özellikleri sunar. Daha fazla özelleştirme seçeneği sunarak, daha fazla konfigürasyona sahip modüler kaldırma kolonlarımızın piyasaya sürülmesi, ihtiyaçlarınıza daha iyi uyacak şekilde daha fazla çeşitlilik sağlar!
Açık döngü senkronizasyonu durumunda, örneğin PA-28 kontrol kutusu veya kendi sisteminizle birden fazla aktüatörü kontrol ederken, programlanmış mikrodenetleyicilerÖncelikle, hız kontrol ünitelerinin sistemi kaldırabilecek kapasitede olduğundan emin olmalısınız. Kullandığınız aktüatör sayısına yetecek kadar pin bulunmalı ve kod kusursuz olmalıdır. kapalı döngü geri bildirimini kullanarak Sistemlerde, dikkate alınması gereken en önemli faktör, senkronize aktüatörlerinize entegre edilen geri besleme kodlayıcısının türüdür. Bu bağlamda, Hall etkisi geri beslemesi ve potansiyometre geri beslemesi listenin başında yer almaktadır.
In Hall effect linear actuators, like the ones shown on this page, the feedback encoder records the number of revolutions the actuator’s driving motor is going through while moving. From this information, it is very easy for the controller to calculate the exact position, and hence the speed, of the actuator’s rod. The encoders of all the linear actuators are constantly sending feedback to the controller, which determines which actuator(s) is lagging or speeding up, and then adjust their respective speeds accordingly to ensure smooth, synchronized movement. When using Hall Effect actuators, it is necessary to use a compatible controller as well. You cannot use them with any ordinary controller, instead, one that is designed for this specific purpose is required. The control box must also have the desired number of channels in accordance with the number of actuators being used. Potentiometer feedback works in a similar way. As the actuator’s rod moves in and out, the potentiometer’s electrical resistance changes with it proportionately. This information is transmitted to the controller, which then performs the exact same function as explained above to synchronize actuators.
While many of our actuators can be customized to include feedback options (just check their data sheet), we also have stocked options!
Starting with our linear actuator range, we have high-performing Hall effect actuators with 12 VDC and 24 VDC variants. For example, our PA-04-HS linear actuator comes installed with a built-in Hall effect sensor that enables synchronization. Customers can also choose between 12 VDC and 24 VDC power supply options. The 12 VDC power supply linear actuators are much more common as most power supplies are of this specification. They are easier to integrate into actuation systems and pack decent performance specifications. The 24 VDC actuators need a specialized power supply, which often requires additional investment and equipment.
Ancak, bu varyantlar daha fazla güç ve tork sağlayabilir, daha düşük akım çeker ve daha ince kablolama gerektirir; bu da yukarıda vurgulanan dezavantajları büyük ölçüde telafi eder. Seçiminiz ne olursa olsun, Progressive Automations, birden fazla aktüatörü kontrol etmenin yatırımınıza değer bir şey olmasını sağlar. Senkronizasyon amacıyla, PA-40 ve FLTCON kontrol kutusu serilerimiz de dahil olmak üzere, geri beslemeye dayalı aktüatörleri yönetmek üzere tasarlanmış çok kanallı kontrol kutuları sunuyoruz. Hall etkisi aktüatörleri için tasarlanan bu kontrolörler, hem 12 hem de 24 VDC aktüatörlerle çalışabilir. PA-40Aslında bu, çift Hall etkisi uygulamaları için özel bir senkronizasyon çözümüdür.