PDF Catalogue
toll free: 1.800.676.6123 | HOURS: 6:30AM - 5PM PST

12 VDC Control Box - 1 Channel - 20A - IP65 - Wireless Remote

12 VDC Control Box - 1 Channel - 20A - IP65 - Wireless Remote

MODEL: PA-33

$105.99
Specs
PA-33 DATA SHEET

The PA-33 is our single channel control box with an increased environmental protection rating. Using the RF remote provided, users have the ability to extend, stop, and retract their actuators from up to 30-50 feet away (open air). The control box has both momentary and non-momentary capabilities as well as an in-line fuse to protect against short circuits.

Using the included wire harness, connect the linear actuator(s) to the control box. Apply 12VDC across the power wires and the system is now ready to use. It is important to ensure that the power supply has a sufficient amperage rating to control the linear actuators. The PA-33 is designed to handle a maximum of 20A.

Please see the PA-33 Data Sheet for information about controls, wiring, and troubleshooting. This unit is compatible with all of our linear actuators, however, for actuators with a higher than 12A current rating, modifying the wiring harness to a thicker gauge is recommended.

PA-33 SPECIFICATIONS

  • Control Ability
    Multiple actuators at the same time
  • Input Voltage
    12 VDC
  • Output Power
    12 VDC
  • Current
    20 Amps
  • Kit Includes
    2 hand remotes, 1 control box, wire harness
  • Special Feature
    Small size
  • Additional Feature
    Easy setup
  • Remote Functions
    up, down, pause (both momentary and non-momentary)
  • Remote Battery Type
    2 x CR2016 3V Lithium cell
  • Size (L x H x W)
    2.9" x 1.1" x 2.8"
  • Unit Weight
    0.35 lbs
  • Protection Class
    IP-65
  • AC Power Option
    with AC-15, PS-10, PS-11 or PS-12
  • Warranty
    18 Months
Data Sheet

Product PDF

PA-33 DATA SHEET
Video

Videos

Dimensional Drawing

Dimensional Drawing

12 VDC Control Box - 1 Channel - 20A - IP65 - Wireless Remote
Warranty

Warranty

We guarantee that all products you receive will be brand new, and have been thoroughly tested for defect and performance before being shipped to you. At Progressive Automations Inc we put our products to the test, stressing their performance in heat, cold, liquid, and under heavy loads and high duty cycles. The specifications listed on our products aren't just approximations, they're backed up by hours and days of testing. We're so confident in our actuators quality, performance, and endurance, that we proudly offer the industry leading 18 month warranty.

All products produced and sold by progressiveautomations.com are covered by our comprehensive 18 month warranty against defect or flaw. If we sell you a product, and it stops working before 18 month pass, we will replace it free of charge. However, the product has to only have been used within its rated parameters and environment conditions.

Please wait...