PDF Catalogue
toll free: 1.800.676.6123 | HOURS: 6:30AM - 5PM PST

12 VDC - Synchronized Dual Hall Effect Actuator Control - 30A - Wireless Remotes

12 VDC - Synchronized Dual Hall Effect Actuator Control - 30A - Wireless Remotes

MODEL: PA-40

$275.00
Specs
PA-40 DATA SHEET

The PA-40 control box allows for synchronous control of two linear actuators with hall effect feedback. Using the RF remote provided, users have the ability to extend, stop, and retract their synchronized actuators from up to 30-50 feet away (open air). The control box has both momentary and non-momentary capabilities as well as an in-line fuse to protect against short circuits.

Using the included wire harness, connect the linear actuators to the control box. Apply 12VDC across the power wires and the system is now ready to use. It is important to ensure that the power supply has a sufficient amperage rating to control the linear actuators. The PA-40 is designed to handle a maximum of 15A per channel.

Please see the PA-40 Data Sheet for information about controls, wiring, and troubleshooting.

PA-40 SPECIFICATIONS

  • Control Ability
    2 matching Hall Effect actuators simultaneously
  • Input Voltage
    12 VDC
  • Output Power
    12 VDC
  • Current
    30A (15A Per Channel)
  • Kit Includes
    1 Control box, 2 Wireless remotes, 1 Power wire harness w/ in-line 30A fuse
  • Special Feature
    Can be set for wired override control using the 3 Pin switch input
  • Additional Feature
    “Plug & Play” – Easy connection terminals.
  • Remote Functions
    Up, Down, Pause (momentary/non-momentary)
  • Remote Battery Type
    2 x CR2016 3V Lithium cell
  • Size (L x H x W)
    5.9" x 1.3" x 3.9"
  • Unit Weight
    0.6 lbs
  • AC Power Option
    with AC-15, PS-10, PS-11 or PS-12
Data Sheet

Product PDF

PA-40 DATA SHEET
Dimensional Drawing

Dimensional Drawing

12 VDC - Synchronized Dual Hall Effect Actuator Control - 30A - Wireless Remotes
Warranty

Warranty

We guarantee that all products you receive will be brand new, and have been thoroughly tested for defect and performance before being shipped to you. At Progressive Automations Inc we put our products to the test, stressing their performance in heat, cold, liquid, and under heavy loads and high duty cycles. The specifications listed on our products aren't just approximations, they're backed up by hours and days of testing. We're so confident in our actuators quality, performance, and endurance, that we proudly offer the industry leading 18 month warranty.

All products produced and sold by progressiveautomations.com are covered by our comprehensive 18 month warranty against defect or flaw. If we sell you a product, and it stops working before 18 month pass, we will replace it free of charge. However, the product has to only have been used within its rated parameters and environment conditions.

Please wait...